What Homeowners Describe
The sash hangs at an angle when we open it, and one corner drops lower than the other. The hinge pin has worked loose, the arm is bent, or the screws have pulled out of soft wood. We see a gap at the top when the window is closed, and water marks on the sill under that gap. The glass is intact. The damage stays hidden until the sash is opened.
What Is Usually Happening
Casement and awning windows carry their weight on hinges and one arm. When a hinge fails, the sash no longer sits square in the frame. It twists, the gasket stops meeting the frame, and the window becomes a place where air and water pass. The glass is rarely the problem. The weight of the sash rests on fewer screws.
What It Does to the House
A sash that hangs will not seal, so rain and cold air find the gap. The frame takes on water at the top corner, the sill stains, and the hinge keeps bending because the weight is now on one side. Left alone, the window stops closing at all.
What It Means for the People Inside
A window that will not close tight lets in water, which can dampen the wall below and may support mold. A sash that drops may also be hard to push open when someone needs to get out.
The Next Step That Saves Money
Have the hinge and arm checked, then replace the failed hardware and reset the sash so it closes square. Do not force the window shut, since that bends the arm further. A small repair now keeps the frame and sill dry.
EcoSpect works across the Finger Lakes and Central New York, including Steuben County, Tompkins County, Wayne County, Yates County, Cayuga County. If you are outside these counties, call (855) DRY-BSMT and we will confirm coverage.
What People Search Next
- egress window hinge
- basement sash hanging
- casement hinge repair
- egress window close
- window hinge screws
- escape window repair
- sash out of square