What Homeowners Describe
At the corner of the block wall, we see mortar missing from the joints and block faces are chipped or loose. The corner may be rounded off, with pieces that come away by hand. We see water staining and white mineral lines, and the corner may sit out of plumb. The courses below the corner may also show a shift. Mowers and other lawn equipment can strike the corner too.
What Is Usually Happening
A block corner carries load from two walls that meet, and it takes impacts from tools, vehicles, and weather. Water in the joints softens the mortar, and freeze and thaw cycles break the edges. Once the corner loses its square, the load spreads unevenly into the courses below. Repointing alone will not restore a corner that has lost its shape.
What It Does to the House
Left alone, the corner keeps losing material and the joint opens wider. Water gets into the wall, and the corner can crush or lean. A small repair now is cheaper than rebuilding a section of wall later. Water at the corner can also reach the interior wall.
What It Means for the People Inside
Loose block and mortar can fall and injure someone nearby. Open joints let water into the wall and can raise dampness inside. A corner that loses strength is a structural concern for the wall it ties together.
The Next Step That Saves Money
Have the corner tapped for loose material and the wall checked for plumb and water. Repair should cut back to sound block, rebuild the corner square, and keep water out of the joints. Then check the roof runoff above it.
EcoSpect works across the Finger Lakes and Central New York, including Cayuga County, Chemung County, Cortland County, Jefferson County, Monroe County. If you are outside these counties, call (855) DRY-BSMT and we will confirm coverage.
What People Search Next
- block corner crumbling
- block wall corner
- corner mortar missing
- loose block corner
- chipped block corner
- block wall repointing
- masonry corner repair